[ Log In ]
3 pin slide switch

SPDT Slide Switch 3 pin 30V

$1.49
Qty:
Tactile momentary push button switch 6 mm x 6 mm (through hole)
LED button tactile switch

LED Button Tactile Switch

$1.89
Qty:
Red Through Hole LED (Light emitting diode)

Single Red Through Hole LED (Light Emitting Diode)

$0.34
Qty:
Green through hole LED (light emitting diode)

Single Green Through Hole LED (Light Emitting Diode)

$0.34
Qty:
Yellow through hole LED (light emitting diode)

Single Yellow Through Hole LED (Light Emitting Diode)

$0.34
Qty:
thumbnail: 8 channel logic analyzer - iLogic

4 Channel Logic Analyzer

$149.00
Qty:
Thumbnail: quad buffer line driver 74HC126E

Quad Buffer Line Driver (Through Hole)

$0.69
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:

Circuit and Programming: Push Button Switch to Change LED Blink Delay

How connect a push button to a microcontroller (make a circucit) and make a program for the Atmel AVR microcontroller using a push button to change the delay that an LED is blinking. The program uses the util/delay.h library and _delay_ms(delayAmount) function. Two delays are used: a 10 millisecond delay and a 100 millisecond delay.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):