[ Log In ]
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Nema 11 stepper motor

NEMA 11 Stepping Motor (16.7 oz-in)

$17.95
Qty:
Newbie Hack Shirt Back
NEMA 23 Stepping Motor 100 oz

NEMA 23 Stepping Motor

$24.95
Qty:
Modular 2/5 amp stepping motor driver

2.5 Stepper Motor Driver (Modular unit)

$45.00
Qty:
NEMA 14 stepper motor

NEMA 14 Stepping Motor (17 oz-in)

$15.95
Qty:
Hex Inverter

Hex Inverter 6 Input and Outputs 2-5.5v Operation

$0.95
Qty:
small aluminum heat sink and a packet of thermal compound
2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:

NEMA 23 Stepper Motor (100 oz-in) 3.0 Amps

NEMA 23 Stepping Motor 100oz NEMA23 100 oz-in motor datasheet
NEMA 23 Stepping Motor 100oz NEMA23 100 oz-in motor datasheet

Introduction:

This NEMA 23 Stepping motor has a step angle of 1.8 degrees (200 steps per revolution). It is a single shaft motor meaning that the shaft does not stick out of the back of the motor. The holding torque is 7.2 Kg-cm (0.707 N-m or 99.98 oz-in). Electrical specifications are 2.25 volts and 3.0 amps of current.

Description:

This is a medium/light power motor typically used for machines that push light loads for applications such as laser head movement, small CNC engraving, FDM (fused Deposition Modeling aka 3D Printer) machines.

NEMA 23 Stepping Motor

$24.95
Qty:

Learn about the NEMA 23 Stepper Motor (100 oz-in) 3.0 Amps

Download and installation of the Windows Drivers for the USBTiny AVR Pocket Programmer (pocketprog-driver.zip) from SparkFun.com.
Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...
Part 2: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...
Using the ADD LEGACY HARDWARE driver installation method for the Windows Drivers for the USBTiny AVR Pocket Programmer. A method of installing drivers that is not directly compatible with Windows or ...
Using avrdude.exe to establish a connection to the microcontroller using the USBTiny AVR Pocket Programmer to determine if the connection is correct and all of the electronics and drivers are in worki...