[ Log In ]
Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:
40 pin IC Socket with mechanical pencil in background for scale.

40 pin IC Socket

$0.89
Qty:
Newbie Hack Shirt Back
.1uf (100nf) ceramic capacitor

Single .1uF (100nF) 50V 10% Through Hole Ceramic Capacitor

$0.24
Qty:
10uF Through Hole Electrolytic Capacitor

Single 10uF Through Hole Electrolytic Capacitor

$0.44
Qty:
thumbnail: 100uF 50v through hole aluminum electrolytic capacitor

100uF/50v Through Hole Electrolytic Capacitor

$0.36
Qty:
Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94
Qty:
Thumbnail: MAX603 Voltage Regulator
Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:

.1uF (100nF) Through Hole Ceramic Capacitor

.1uf (100nf) ceramic capacitor
.1uf (100nf) ceramic capacitor

Introduction:

Dipped radial multilayer ceramic capacitor with a capacitance of .1uF (micro-farad) or 100nF (nano-farad). Tolerance is 10% and has a 50V rating. Lead spacing: 2.5 mm.

Description:

These .1uF capacitors are great for filtering digital signal power.

Single .1uF (100nF) 50V 10% Through Hole Ceramic Capacitor

$0.24
Qty:

Learn about the .1uF (100nF) Through Hole Ceramic Capacitor

The power pins of the AVR may experience interference from time to time. It is advised to add a decoupling capacitor across the VCC and GND pins of the AVR microcontroller. If the capacitor is locat...
The 7805 Voltage regulator outputs 5 volts and requires at least 8 volts at the input (high dropout voltage). The middle pin is connected to ground. Capacitors are needed to reduce the peak to pea...
A capacitor is used to smooth the rectified waveform. The capacitor charges as the voltage rises and holds that charge and the next pass of the current raises the charge of the capacitor and this kee...
Capacitors can be used to smooth a rough or noisy signal. In this case, an accelerometer is being read by the ADC. The ADC is seeing a very noisy signal from the accelerometer. A 10 uf (micro far...
The ACD result and deflection is tested with a capacitors: 10 uf (micro farad) and 100 uf.