[ Log In ]
Newbie Hack Shirt Back
Image of the Atmega324p

Atmega324P

$8.50
Qty:
USB AVR programmer

USB AVR Programmer

$9.95
Qty:
Breadboard adapter for the USBasp AVR Programmer

USBasp Breadboard Breakout Adapter

$4.90
Qty:
Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94
Qty:
Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:
Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75
Qty:
3 pin slide switch

SPDT Slide Switch 3 pin 30V

$1.49
Qty:
Serial to USB converter with Micro USB cable

USB to Serial Converter

$10.95
Qty:
Thumbnail: 4x4 keypad top view.

4x4 Keypad with Adhesive Backing

$3.80
Qty:

Atmel Atmega324 AVR Microcontroller

Image of the Atmega324p
Image of the Atmega324p

Introduction:

A device called a microcontroller that you can program to do all kinds of fun stuff, like controlling robots, turning on or off your appliances, creating artistic lighting effects, sensing the environment, and much more.

Description:

If you've watched the videos here, then you are almost an expert with microcontrollers, so you know what they are capable of. Really, these awesome devices are only limited by your own imagination. Buy one and create some very cool things.

Atmega324P

$8.50
Qty:

Learn about the Atmel Atmega324 AVR Microcontroller

The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v to 5.5v
The power pins of for the Atmega32, Atmega324A, Atmega324P and other pin compatible AVR microcontrollers are located at pin 10 (VCC) and pin 11 (GND).
Introduction to the Atmel Atmega32 AVR microcontroller and the pin assignments (what each pin of the chip does). The pins include PORTs (PORTA, PORTB, PORTC and PORTD) and 8 pins for each port, ADC (...
Introduction to programmers line the USBTiny and the Pocket AVR and that this device is plugged into the computer and to the microcontroller (chip) to transfer the program from the computer to the mic...
Description and physical view of the 8 pins of PORTB on the Atmel AVR Atmega32 microcontroller.