AVR Microcontroller Advanced Kit

This is the next step up from Microcontroller Intermediate Kit. With the Advanced Kit you will receive everything the intermediate kit plus additional crimp pins, SIL housings, a larger LCD display (20x2), an Accelerometer, and a Range Finder.

• 1 x Atmel Atmega324P-20PU AVR Microcontroller
• 1 x USB AVR Programmer
• 2 x 36 Pin 1x Header IDC
• 1 x Breadboard Adapter PCB for USBasp Programmer
• 1 x White Prototyping Breadboard with Power Rails
• 1 x Jumper Wire Pack 140 Pieces Multi-Size Multi-Color
• 12 x Green Through Hole LED
• 2 x Red Through Hole LED
• 14 x 330 Ohm Through Hole Resistor
• 4 x Push Button Switch 6x6 Flat 4.3mm
• 4 x 100uF Polarized Capacitor 50v 20% Through Hole
• 4 x 10UF Electrolytic Capacitor
• 4 x 10K Resistor 1/4 Watt Through Hole
• 4 x 1K Resistor 1/4 Watt Through Hole
• 7 x .1uf 50v Capacitor Through Hole 10%
• 1 x 20x4 LCD Character Display Module
• 3 x 10K potentiometer (Trimmer)
• 1 x 50K potentiometer Through Hole
• 1 x 5V Regulator LDO Low Dropout MAX603 Through Hole
• 1 x 3.3V Regulator LDO Low Dropout MAX603 Through Hole
• 1 x Quad Buffer Line Driver Through Hole
• 1 x Crystal 16MHz 20pf Through Hole
• 1 x Crystal 18.432MHz 18pf 30ppm
• 1 x FTDI USB to Serial Converter
• 1 x 5V 1.5A Voltage Regulator Through Hole
• 2 x 22pf 200V Capacitor Through Hole 5%
• 14 x Crimp Pin for SIL Housing
• 2 x 5 Pin SIL Housing
• 2 x Two Pin 2P SIL Housing
• 1 x Ultrasonic Range Finder - Distance Measuring Transducer Sensor
• 1 x Accelerometer 16g ADXL 345 Breakout with I2C and SPI (For use with a 3.3v power supply only)