[ Log In ]
[ Your Cart ]
Description of First Image

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!
Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:
Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94
Qty:
Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75
Qty:
40 pin IC Socket with mechanical pencil in background for scale.

40 pin IC Socket

$0.89
Qty:
Newbie Hack Shirt Back
.1uf (100nf) ceramic capacitor

Single .1uF (100nF) 50V 10% Through Hole Ceramic Capacitor

$0.24
Qty:
10uF Through Hole Electrolytic Capacitor

Single 10uF Through Hole Electrolytic Capacitor

$0.44
Qty:
thumbnail: 100uF 50v through hole aluminum electrolytic capacitor

100uF/50v Through Hole Electrolytic Capacitor

$0.36
Qty:
Thumbnail: MAX603 Voltage Regulator
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:

22pF (.022nF or .000022uF) Through Hole Ceramic Capacitor

22 pF Capacitor
22 pF Capacitor

Introduction:

A 22 pF (Pico Farad) multilayer ceramic capacitor great for use with crystal oscillator operation. Other specifications include: voltage rating 200 V, tolerance 5% and operating temperature range of -55 degree C to 125 degree C.

Description:

These capacitors are typically used with crystals to insure proper function of the crystal. A crystal will have a specified capacitance and this is calculated along with the capacitance on the PCB to derive the proper value for the capacitor.

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:

Learn about the 22pF (.022nF or .000022uF) Through Hole Ceramic Capacitor

On Paper: Adding a Decoupling Capacitor to the Power Pins of the AVR
The power pins of the AVR may experience interference from time to time. It is advised to add a decoupling capacitor across the VCC and GND pins of the AVR microcontroller. If the capacitor is locat...
Result: ADC (Analog to Digital Conversion) Using Capacitors to Smooth a Voltage Signal
Capacitors can be used to smooth a rough or noisy signal. In this case, an accelerometer is being read by the ADC. The ADC is seeing a very noisy signal from the accelerometer. A 10 uf (micro far...
On Paper: Power Requirements of the Atmega32 and Atmega324 AVR Microcontrollers
The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v to 5.5v
On Paper: The Power Pins of the AVR Atmega32 and Atmega324 Microcontroller
The power pins of for the Atmega32, Atmega324A, Atmega324P and other pin compatible AVR microcontrollers are located at pin 10 (VCC) and pin 11 (GND).
On Paper and Breadboarding: 7805 Voltage Regulator and Recommended Capacitor Configuration
The 7805 Voltage regulator outputs 5 volts and requires at least 8 volts at the input (high dropout voltage). The middle pin is connected to ground. Capacitors are needed to reduce the peak to pea...
About Us - Site Map - Donate
© Copyright 2020, PHD Robotics, LLC. dba NewbieHack.com