[ Log In ]
Newbie Hack Shirt Back
Top view of the bluetooth module

Bluetooth Module

$17.50
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
Type K Thermocouple Temperature Sensor

Type K Thermocouple - Temperature Sensor

$4.95
Qty:
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Image of the Atmega324p

Atmega324P

$8.50
Qty:

10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

$0.85
Qty:

Bluetooth Module for Wireless Communications

Top view of the bluetooth module Bottom view of the bluetooth module Width of the bluetooth module measuring 0.642 inches Length of the bluetooth module measuring 1.48 inchesinches
Top view of the bluetooth module Bottom view of the bluetooth module Width of the bluetooth module measuring 0.642 inches Length of the bluetooth module measuring 1.48 inchesinches

Introduction:

Communicate wirelessly with this Bluetooth module and use it in your next microcontroller project.

Description:

This Bluetooth module contains a CSR BlueCore 4-External single chip radio and baseband integrated circuit for Bluetooth 2.4GHz wireless communication that features EDR or enhanced data rates of up to 3Mbps (Megabits per second). With the added 8Mbit (Megabit) external flash (included), voice and data can be transmitted. The Blootooth chip by CSR is fully qualified Bluetooth v2.0+EDR. Full Piconet and Scatternet support is also featured with this module.


Too communicate, simply use UART (Serial communication) using the TXD and RXD header pins. Power this module with a DC voltage between 3.6 volts to 6 volts. Communication voltage requires 3.3 volts. The headers on this module have connections for RXD (receive), TXD (Transmit), GND (Ground), VCC (positive voltage), EN (Enable) and State (receive the state or status of he Bluetooth module during its use).

Bluetooth Module

$17.50
Qty:

Learn about the Bluetooth Module for Wireless Communications

Introduction to the Atmel Atmega32 AVR microcontroller and the pin assignments (what each pin of the chip does). The pins include PORTs (PORTA, PORTB, PORTC and PORTD) and 8 pins for each port, ADC (...
Installing the GCC progrmming enviromnent WINAVR (an AVR-GCC IDE - Integrated Development Environment) for Windows to be able to write programs for the Atmel AVR Microcontrollers. The location: winavr...
Start, executing or running the WINAVR IDE GCC progrmmming environment for the Atmel AVR microcontrollers. Programmers Notepad is the main program to use for the programming, the user interface. MFile...
Using avrdude.exe to establish a connection to the microcontroller using the USBTiny AVR Pocket Programmer to determine if the connection is correct and all of the electronics and drivers are in worki...
Viewing all of the command line options for avrdude.exe using avrdude -help at the cmd (command line).