[ Log In ]
Newbie Hack Shirt Back
Image of the Atmega324p

Atmega324P

$8.50
Qty:
USB AVR programmer

USB AVR Programmer

$9.95
Qty:
Breadboard adapter for the USBasp AVR Programmer

USBasp Breadboard Breakout Adapter

$4.90
Qty:
Serial to USB converter with Micro USB cable

USB to Serial Converter

$10.95
Qty:
Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

$0.94
Qty:
Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

$0.43
Qty:
Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

$0.75
Qty:
Thumbnail: 4x4 keypad top view.

4x4 Keypad with Adhesive Backing

$3.80
Qty:
thumbnail: 8 channel logic analyzer - iLogic

4 Channel Logic Analyzer

$149.00
Qty:

AVR Microcontroller Intermediate Kit with DVD

Microcontroller Intermediate Kit with DVD
Microcontroller Intermediate Kit with DVD

Introduction:

This is the next step up from our incredibly popular Microcontroller Beginner Kit. With the intermediate kit you will receive everything the Beginner kit comes with with some notable additions. This kit also includes the DVD "Beginning Microcontrollers" by Patrick Hood-Daniel featuring 15 hours of in-depth step-by-step instructions.

Description:

This kit includes the following items:

  • 1 x Atmel Atmega324P-20PU AVR Microcontroller
  • 1 x USB AVR Programmer
  • 45 x 2x Pin Header IDC
  • 1 x Breadboard Adapter PCB for USBasp Programmer
  • 1 x White Prototyping Breadboard with Power Rails
  • 1 x Jumper Wire Pack 140 Pieces Multi-Size Multi-Color
  • 12 x Green Through Hole LED
  • 2 x Red Through Hole LED
  • 14 x 330 Ohm Through Hole Resistor
  • 1 x Push Button Switch 6x6 Flat 4.3mm
  • 4 x 100uF Polarized Capacitor 50v 20% Through Hole
  • 4 x 10UF Electrolytic Capacitor
  • 4 x 10K Resistor 1/4 Watt Through Hole
  • 4 x 1K Resistor 1/4 Watt Through Hole
  • 7 x .1uf 50v Capacitor Through Hole 10%
  • 1 x 16x2 LCD Character Display Module
  • 8 x Connector Header Breakaway .100 1 POS VERT Male Header
  • 3 x 10K potentiometer (Trimmer)
  • 1 x 50K potentiometer Through Hole
  • 1 x 5V Regulator LDO Low Dropout MAX603 Through Hole
  • 1 x 3.3V Regulator LDO Low Dropout MAX603 Through Hole
  • 1 x Quad Buffer Line Driver Through Hole
  • 1 x Crystal 16MHz 20pf Through Hole
  • 1 x Crystal 18.432MHz 18pf 30ppm
  • 1 x FTDI USB to Serial Converter
  • 1 x 5V 1.5A Voltage Regulator Through Hole
  • 2 x 22pf 200V Capacitor Through Hole 5%
  • 1 x Beginning Microcontroller DVD by Patrick Hood-Daniel: 15 hour comprehensive tutorial in 49 parts.

Microcontroller Intermediate Kit with DVD

$89.95
Qty:

Learn about the AVR Microcontroller Intermediate Kit with DVD

Description and physical view of the 8 pins of PORTB on the Atmel AVR Atmega32 microcontroller.
The power pins of for the Atmega32, Atmega324A, Atmega324P and other pin compatible AVR microcontrollers are located at pin 10 (VCC) and pin 11 (GND).
The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v to 5.5v
Introduction to the Atmel Atmega32 AVR microcontroller and the pin assignments (what each pin of the chip does). The pins include PORTs (PORTA, PORTB, PORTC and PORTD) and 8 pins for each port, ADC (...
The goal of this video is to show you how to program ATmega32A chip using AVR USB Programmer Video Courtesy of Youtube Channel: BinaryUpdates