[ Log In ]
Mechanical Drafting Pencil

Mechanical Drafting Pencil - 5mm

$19.95
Qty:
Newbie Hack Shirt Back
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
Type K Thermocouple Temperature Sensor

Type K Thermocouple - Temperature Sensor

$4.95
Qty:
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Image of the Atmega324p

Atmega324P

$8.50
Qty:

10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

$0.85
Qty:

Mechanical Drafting Pencil - 5mm

Mechanical Drafting Pencil
Mechanical Drafting Pencil

Introduction:

Listed by popular demand! This mechanical drafting pencil is used in our product images to demonstrate scale, and now we are making it available for purchase.

Description:

Used by professionals across various industries, this pencil has a knurled, stainless steel grip, and a built-in eraser under the cap. It offers cushion points for maximum control and reduces the chances of lead breakage.

  • Item Weight 0.5 ounces
  • Product Dimensions 0.2 x 0.2 x 5.5 inches

Mechanical Drafting Pencil - 5mm

$19.95
Qty:

Learn about the Mechanical Drafting Pencil - 5mm

A MEMS device is a package that contains mechanical and electrical component at the micro scale. MEMS is Micro Electromechanical System.
Showing the bouncing (mechanical bounce) effect of a push button switch using an oscilloscope showing the effect of the voltage level when the push button is pressed.
Showing the bouncing (mechanical bounce) effect with an oscilloscope for a push button switch with hardware debouncing introduced using a capacitor showing the effect of the voltage level when the pu...
Soldering a wire to a metal pin of a header is tricky. The problem with simply soldering a wire to a metal pin is that the wire can easily break off of the pin. The solution is to create a mechanica...
Servos are motors that use feedback to control the motor's position. This type of control is called closed loop control. Servos use a special electromechanical device to provide this feedback. This ...