[ Log In ]
ADXL 345 Accelerometer breakout with headers

ADXL345 Breakout board (I2C/SPI)

$27.95
Qty:
10 DOF IMU (Inertial measurement unit) top view

10 DOF Inertial Measurement Unit

$49.50
Qty:
Triple Axis Magnetometer product view

Magnetometer Triple Axis Compass i2c

$14.89
Qty:
Type K Thermocouple Temperature Sensor

Type K Thermocouple - Temperature Sensor

$4.95
Qty:
Ultrasonic Distance Measuring Range Finder

Ultrasonic Range Finder - Distance Measuring Transducer Sensor

$4.95
Qty:
Flex Sensor - Sensing Bending and Displacement

55.37mm (2.18 Inch) Flex Sensor

$8.50
Qty:
PIR sensor on dark background

PIR Sensor - Pyroelectric Motion Sensor

$9.95
Qty:
Newbie Hack Shirt Back
Top view of the temperature humidity sensor

Temp/Humidity Sensor

$9.90
Qty:
Temperature Sensor Probe view from top

Platinum Resistance Temperature Sensor Probe

$3.95
Qty:

Accelerometer ADXL 345 Breakout Board with I2C and SPI Interface

ADXL 345 Accelerometer breakout with headers Back of the ADXL 345 Accelerometer Width measurement of the ADXL 345 accelerometer breakout. .8175 inches or 20.76 mm. Measurement of the depth of the ADXL 345 accelerometer at .636 inches or 16.1544 mm
ADXL 345 Accelerometer breakout with headers Back of the ADXL 345 Accelerometer Width measurement of the ADXL 345 accelerometer breakout. .8175 inches or 20.76 mm. Measurement of the depth of the ADXL 345 accelerometer at .636 inches or 16.1544 mm

Introduction:

ADXL345 3-Axis Accelerometer. Measures shock, tilt, force, acceleration, and gravity up to 16gs. Interface using I2C or SPI for assured accuracy.

Description:

An accelerometer measures the amount of gravity. Great for robotics, measuring tilt and shock, this 3-Axis accelerometer gauges gravity up to 16 Gs. This board will give you the power to create a self balancing robot, a model airplane that flies on autopilot, a G-Force detector, the possibilities are endless!

The module will support single and double tap detection as well as activity-inactivity monitoring. Utilizes high resolution measurement (13 bit) and ultra-low power consumption. For use with a 3.3v power supply only

Features:

  • SPI or I2c communication.
  • Designed for 3.3v power supply only.
  • Memory management system with a 32-level FIFO buffer to store data with minimized host processor activity.
  • Ultralow power consumption: 40 µA in measurement mode and 0.1 µA in standby mode.
  • High resolution enables measurement of inclination changes less than 1.0°.
  • Ready-to-use examples save development time.

ADXL345 Breakout board (I2C/SPI)

$27.95
Qty:

Learn about the Accelerometer ADXL 345 Breakout Board with I2C and SPI Interface

Video Tutorial for I2C or IIC communication.
I2C
I2C
An accelerometer measures acceleration. The unit of measurement for acceleration is m/s/s or m/(s^2): meters per second per second, or meters per second squared. Generally, accelerometers measure ...
Introduction to SPI (Serial Peripheral Interface) and which pins are connected together (pinout) from the microcontroller to the specific SPI pin functions (MISO,MOSI,SCK,Reset, VCC and GND).
Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC...