[ Log In ]
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock
Image of the Atmega324p



10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

16x2 LCD (Liquid Crystal Display)

16x2 LCD (Liquid Crystal Display)

White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

Clear Semi Transparent Breadboard

Clear Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

Red Through Hole LED (Light emitting diode)

Single Red Through Hole LED (Light Emitting Diode)


On Paper: Interrupts Explained

An interrupt is an event that stops regular program flow to run a separate set of code that relates to the interrupt. Interrupts have many uses and applications. Interrupts can be used with:
- Timers and counters (When a timer matches a specific value)
- Serial communications (USART, UART - tell you when data is received, or when the transmit is ready to take data to transmit)
- When a pin goes from high to low or vice verse
- ADC (Analog to Digital Converter) completes the conversion
- Software interrupt (custom)
- And many others.
Response From: Tlarson

Interrupts can be useful in many applications.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.


Code (optional):