[ Log In ]
White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95
Qty:
Clear Semi Transparent Breadboard

Clear Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$8.50
Qty:
Thumbnail: A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground.

Bundle of 65 Male to Male Flexible Jumper Wires

$8.95
Qty:
A single mini breadboard 17X10. Black color.
Single White 17X10 mini breadboard
Single Blue 17x10 Mini Breadboard
A single 17x10 mini breadboard (Red)
Single Green Mini Breadboard
140 piece multi-color multi-size jumper wires for breadboarding.

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

$6.75
Qty:
40 pin IC Socket with mechanical pencil in background for scale.

40 pin IC Socket

$0.89
Qty:

White Prototyping Breadboard

White prototyping breadboard with 30 tie strips and two power rails on each side.
White prototyping breadboard with 30 tie strips and two power rails on each side.

Introduction:

A Prototyping breadboard with 30 tie strips and two power rails on both sides.

Description:

These modular breadboards are great for prototyping. Snap two or more together to make very large prototyping real estate. Each breadboard has notches on all sides to snap to another breadboard. The side of the breadboard is unlimited.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95
Qty:

Learn about the White Prototyping Breadboard

Introduction to breadboards and how the pin connections are connected together (tie strips).
Description of the pin tie strips of the breadboard.
Description of the power tie strips of the breadboard.
Connecting two breadboards and powering all of the GND - and VCC + rails on the breadboards. Wires are connected between the two breadboards and wires are connected between the upper and lower rails...
Breadboard circuit of one button with hardware debouncing and two LEDs (Light Emitting Diodes) connected to an AVR microcontroller. The push button switch is connected to pin 1 on PORT B and the LEDs...