[ Log In ]
Thumbnail: A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground.

Bundle of 65 Male to Male Flexible Jumper Wires

$8.95
Qty:

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

$6.75
Qty:
White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95
Qty:
Clear Semi Transparent Breadboard

Clear Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$8.50
Qty:
A single mini breadboard 17X10. Black color.
Single White 17X10 mini breadboard
Single Blue 17x10 Mini Breadboard
A single 17x10 mini breadboard (Red)
Single Green Mini Breadboard
40 pin IC Socket with mechanical pencil in background for scale.

40 pin IC Socket

$0.89
Qty:

Flexible Jumper Wires Male to Male 65 Piece Bundle

A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground. A single male to male jumper wire connected at both ends into a breadboard. The bundle of wires is shown, separated by 4 different lengths.
A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground. A single male to male jumper wire connected at both ends into a breadboard. The bundle of wires is shown, separated by 4 different lengths.

Introduction:

Male to Male variable length jumper wires for breadboarding and other prototyping circuits. Affordable, flexible, easy to use. Perfect for DIY enthusiasts.

Description:

Used primarily in circuit board development, jumper wires help establish an electrical connection between two points in a circuit. Jumper wires can be used to alter a circuit or detect any potential problems in a circuit.

This bundle of 65 pieces contains 4 different lengths of jumper wires that consist of varying colors for the purpose of distinguishing between them when working with multiple wires.

In each bundle you will find: 4 - 10" (254mm) wires, 4 - 8" (203.2mm) wires, 8 - 6.3" (160mm) wires and 49 - 4.65" (118mm) wires for a total of 65 in all (Please note these measurements are approximate values).

Each wire contains male terminations at both ends or "Male to Male". The male terminations fit into 0.1" (2.54mm) headers and/or breadboards.

Bundle of 65 Male to Male Flexible Jumper Wires

$8.95
Qty:

Learn about the Flexible Jumper Wires Male to Male 65 Piece Bundle

Connecting two breadboards and powering all of the GND - and VCC + rails on the breadboards. Wires are connected between the two breadboards and wires are connected between the upper and lower rails...
How to get an LED to blink on the Arduino board as well as on the breadboard by using the Arduino IDE. Using the Arduino Sketch, a program is developed to make the onboard LED blink (see code below... Includes Code
Introduction to breadboards and how the pin connections are connected together (tie strips).
Soldering a wire from one location on a perf board to another location on a perf board using a wire stripper, soldering iron, perf board and solder. Specifically for the MISO (Master In slave Out).
Soldering a wire from one location on a perf board and to a header pin to another location on a perf board and to a header pin using a wire stripper, soldering iron, perf board and solder. Specificall...