[ Log In ]
140 piece multi-color multi-size jumper wires for breadboarding.

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

$6.75
Qty:
Thumbnail: A bundle of 65 jumper wires of various length and color. Bound together with the male connectors shown in the foreground.

Bundle of 65 Male to Male Flexible Jumper Wires

$8.95
Qty:
White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95
Qty:
Clear Semi Transparent Breadboard

Clear Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$8.50
Qty:
A single mini breadboard 17X10. Black color.
Single White 17X10 mini breadboard
Single Blue 17x10 Mini Breadboard
A single 17x10 mini breadboard (Red)
Single Green Mini Breadboard
40 pin IC Socket with mechanical pencil in background for scale.

40 pin IC Socket

$0.89
Qty:

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

140 piece multi-color multi-size jumper wires for breadboarding. This picture shows 14 different length jumper wires aligned by size from largest (top) to smallest (bottom) A Breadboard with different length jumper wires installed.
140 piece multi-color multi-size jumper wires for breadboarding. This picture shows 14 different length jumper wires aligned by size from largest (top) to smallest (bottom) A Breadboard with different length jumper wires installed.

Introduction:

These are wires that are used for breadboarding. The solid core wires are rigid and have varying lengths and colors. 10 pieces of 14 different length wires = 140 pieces total. Colors May Vary.

Description:

This jumper wire pack contains 140 total pieces. 10 pieces each of 14 separate length wires.

  • 10X - 125mm (4.9 inch) Red
  • 10X - 100mm (3.93 inch) Blue
  • 10X - 75mm (2.95 inch) Green
  • 10X - 50mm (1.97 inch) White
  • 10X - 25mm (0.98 inch) Orange
  • 10X - 22mm (0.87 inch) Green
  • 10X - 20mm (0.79 inch) Blue
  • 10X - 17mm (0.67 inch) White
  • 10X - 15mm (0.59 inch) Red
  • 10X - 12mm (0.47 inch) Yellow
  • 10X - 10mm (0.39 inch) Gray
  • 10X - 7mm (0.27 inch) Orange
  • 10X - 5mm (0.19 inch) Black/Blue
  • 10X - 2mm (0.08 inch) Bare (No Color)

Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

$6.75
Qty:

Learn about the Jumper Wire Pack 140 Pieces Multi-Size Multi-Color

Connecting two breadboards and powering all of the GND - and VCC + rails on the breadboards. Wires are connected between the two breadboards and wires are connected between the upper and lower rails...
How to get an LED to blink on the Arduino board as well as on the breadboard by using the Arduino IDE. Using the Arduino Sketch, a program is developed to make the onboard LED blink (see code below... Includes Code
Introduction to breadboards and how the pin connections are connected together (tie strips).
Soldering a wire from one location on a perf board to another location on a perf board using a wire stripper, soldering iron, perf board and solder. Specifically for the MISO (Master In slave Out).
Soldering a wire from one location on a perf board and to a header pin to another location on a perf board and to a header pin using a wire stripper, soldering iron, perf board and solder. Specificall...