Result: A Single Hobby Servo with the PWM Signal on OC1 or PD5 Pin With a 2 ms Pulse Width

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!

50K Potentiometer Panel Mount (Non Trimmer) With Knob

$2.45

Qty:

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75

Qty:

USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80

Qty:

3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65

Qty:

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock

Qty:

Atmega324P

$8.50

Qty:

10K Trimmer Potentiometer (Through Hole)

$0.85

Qty:

16x2 LCD (Liquid Crystal Display)

$12.50

Qty:

White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95

Qty:

Result: A Single Hobby Servo with the PWM Signal on OC1 or PD5 Pin With a 2 ms Pulse Width

The Hobby Servo is connected to PD5 or OC1 pin and tested for a 2 ms pulse width.

The servo horn did not rotate to its expected position. Trial and error is required to determine the actual value that is needed to get to the desired position. Caution is advised not to exceed the servo's limits, or the servo may be damaged during this process.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):

Learn the Fundamentals of Mechatronics!

Result: A Single Hobby Servo with the PWM Signal on OC1 or PD5 Pin With a 2 ms Pulse Width

Comments and Additional Information