[ Log In ]
Flex Sensor - Sensing Bending and Displacement

55.37mm (2.18 Inch) Flex Sensor

$8.50
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
84 oz-in NEMA 17 Stepping motors (also called stepper motor)
Image of the Atmega324p

Atmega324P

$8.50
Qty:

10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

$0.85
Qty:
16x2 LCD (Liquid Crystal Display)

16x2 LCD (Liquid Crystal Display)

$12.50
Qty:
White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)

$7.95
Qty:

Programming: ADC (Analog to Digital Converter) Getting the 8-bit Result after Conversion

The result from an ADC conversion is located in the ADCH register. Make sure to enable left shift to get all of the 8-bit data in the ADCH register. The ADLAR bit in the ADMUX register controls the left and right shift for the ADCH and ADCL registers.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):