[ Log In ]

16x2 LCD (Liquid Crystal Display)

16x2 LCD (Liquid Crystal Display)

2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

Front of the 128x64 display module

128x64 OLED Display Yel/Blu

3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock
Image of the Atmega324p


10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

White prototyping breadboard with 30 tie strips and two power rails on each side.

White Prototyping Breadboard (2x30 columns of tie strips and 2x2 rows of power strips)


On Paper: Understanding the Pins of the LCD (pinout) and Their Functions

Each of the pins on the LCD have their own functions.

#1 pin: VSS - Ground
#2 pin: VDD - 5v Supply
#3 pin: V0 - contract Adjustment
#4 pin: RS - Register Select Signal
#5 pin: RW - Read/Write
#6 pin: Enable
#7, #8, #9, #10 pins: Low Data Lines
#11, #12, #13, #14 pin: High Data Lines
#15 pin: Anode or + LED backlight
#16 pin: Cathode or - LED backlight

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.


Code (optional):