Schematic: Two LEDs and Push Button to Microcontroller with Hardware Debouncing
Schematic on paper of one button with hardware debouncing and two LEDs (Light Emitting Diodes) connected to an AVR microcontroller. The push button switch is connected to pin 1 on PORT B and the LEDs are connected to pin 0 and pin 2 on the same port. These are green LEDs so a 330ohm resistor is used to limit the current through the LED.
Comments and Additional Information
Have some code to share? Or additional information? Respond here:
You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.