[ Log In ]
molex connector with crimp pins thumbnail

4 Pin Female Molex Connector with Crimp Pins

$3.50
Qty:
thumbnail: 3 position female connector with 2.54mm pitch

3 position female connector with 2.54mm pitch

$0.55
Qty:
9V Battery Hold with Wire Leads

9V Battery Holder with Wire Leads

$0.49
Qty:
2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
NEMA 23 Stepping Motor 100 oz

NEMA 23 Stepping Motor

$24.95
Qty:
Serial to USB converter with Micro USB cable

USB to Serial Converter

$10.95
Qty:
ADXL 345 Accelerometer breakout with headers

ADXL345 Breakout board (I2C/SPI)

$27.95
Qty:

Part 1: Making a Convenient SPI connector for USBTiny

Part 1: Making a convenient connector from a 2x3 female header to an inline 6 pin male header for SPI communication from USBTiny at the computer end to the microcontrollers MOSI, MISO, SCK, Reset, VCC and Gnd pins (using headers, perf board and solid core jumper wires).

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):