[ Log In ]
Newbie Hack Shirt Back
Image of the Atmega324p


USB AVR programmer

USB AVR Programmer

Breadboard adapter for the USBasp AVR Programmer

USBasp Breadboard Breakout Adapter

Serial to USB converter with Micro USB cable

USB to Serial Converter

Thumbnail: Crystal Oscillator 18.432 MHz for UART

18.432 MHz Crystal Oscillator 18pf 30ppm

Thumbnail: 22 pF Capacitor

22 pF Multilayer Ceramic Capacitor

Thumbnail: Quartz crystal oscillator - 16 MHz

16 MHz Crystal Oscillator 20 pF Through Hole

Thumbnail: 4x4 keypad top view.

4x4 Keypad with Adhesive Backing

Thumbnail: quad buffer line driver 74HC126E

Quad Buffer Line Driver (Through Hole)


AVR Microcontroller Beginner Kit

Microcontroller Beginner Kit
Microcontroller Beginner Kit


This is a Microcontroller Beginner Kit that will include everything you need to begin programming your first microcontroller.


This kit includes the following items:

  • 1 x Atmel Atmega324P-20PU AVR Microcontroller
  • 1 x USB AVR Programmer
  • 1 x White Prototyping Breadboard with Power Rails
  • 1 x Jumper Wire Pack 140 Pieces Multi-Size Multi-Color
  • 12 x Green Through Hole LED
  • 2 x Red Through Hole LED
  • 14 x 330 Ohm Through Hole Resistor
  • 1 x Push Button Switch 6x6 Flat 4.3mm
  • 2 x 100uF Polarized Capacitor 50v 20% Through Hole
  • 2 x 10UF Electrolytic Capacitor
  • 4 x 10K Resistor 1/4 Watt Through Hole
  • 4 x 1K Resistor 1/4 Watt Through Hole
  • 5 x 2x Pin Header IDC
  • 6 x Breakaway Male Header Single Position
  • 1 x Breadboard Adapter PCB for USBasp Programmer

Microcontroller Beginner Kit


Learn about the AVR Microcontroller Beginner Kit

Description and physical view of the 8 pins of PORTB on the Atmel AVR Atmega32 microcontroller.
The power pins of for the Atmega32, Atmega324A, Atmega324P and other pin compatible AVR microcontrollers are located at pin 10 (VCC) and pin 11 (GND).
The power requirements for the the two microcontrollers (Atmega32 and Atmega324): Atmega32 - 4.5v to 5.5v Atmega324A - 1.8v to 5.5v (a much broader range of voltages) Atmega324P - 2.7v to 5.5v
Introduction to the Atmel Atmega32 AVR microcontroller and the pin assignments (what each pin of the chip does). The pins include PORTs (PORTA, PORTB, PORTC and PORTD) and 8 pins for each port, ADC (...
The goal of this video is to show you how to program ATmega32A chip using AVR USB Programmer. Video Courtesy of Youtube Channel: BinaryUpdates Includes Code