Operational Amplifier (Op Amp) - Simple Opamp Circuit - Negative Feedback using 20k resistors and 10k resistors and an opamp
This is the prototype of the circuit for Negative feedback where 4 volts with a 10k resistor is at the inverting input with a 20k resistor also connected to the output, and 5 volts (using 10 volts with a voltage divider) at the non-inverting input.
The whole point of this circuit is to force the inputs to be equal and the output will change to make this happen.
Comments and Additional Information
Have some code to share? Or additional information? Respond here:
You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.