You want an ARM microcontroller kit that will have the components to get you deep into circuits that take advantage of many of the STM32 feature set. Consider this microcontroller kit based around the STM32F0 series.
This kit includes everything you will need to accomplish almost any ARM microcontroller circuit and development project. Our advanced kit is composed of the components for the serious developer and includes a variety of passive components, sensors, communication components and the STM32F0 series ARM microcontroller on a breakout board to ease the development process.
The ARM development board uses the included three breadboards to enable the STM32 microcontroller to have two tie strips for every pin!! That will give you nine total connections for each pin where four positions is on one tie strip and five on the other.
The kit includes the following components:
- STM32F030 Microcontroller and breakout board
- ST-LinkV2 Programmer
- Cable to connect the ST-LinkV2
- (3) Breadboards
- Ultrasonic Range Finder
- ADXL345 3 Axis Accelerometer
- 16x2 LCD Character Display Module
- 20x4 LCD Character Display Module
- (3) 10k Trimmer Potentiometer
- 50k Potentiometer
- 5V Low Dropout Regulator MAX603
- 3V Low Dropout Regulator MAX604
- Quad Buffer Line Driver
- 16 MHz Crystal
- 18.432 MHz Crystal
- FTDI USB to Serial Converter with Cable (Great for USART development)
- 5V 1.5A Voltage Regulator
- (2) 22pF 200V Capacitor (mainly for use with the crystals)
- 40 Pin Male Header
- Resistors: (4) 1k, (4) 10k, and (20) 330 ohm
- (4) Push Buttons
- (12) Green LEDs
- (2) Red LEDs
- Solid Core Jumper Set with 140 total hookup wires of different lengths and colors
- (4) 10uF Electrolytic Capacitors
- (4) 100uF Electrolytic Capacitors
- (13) 100nF/0.1uF Capacitors
- (2) 5 Pin SIL Housing
- (2) 2 Pin Sil Housings
- (14) Crimp Pins for the SIL Housings