18.432 MHz Quartz Crystal Oscillator

I am retrofitting two Emco f1 mills, the motor, at least on the x axis is a 83 oz/in with a 1/4" shaft, would item #291 work or could I use the red fly system?

The 3 axis electronics combo, will work with your EMCO mill as well as the redFly. The difference between both these kits is one comes assembled while the other comes as a DIY kit. The major concern if trying to retrofit, our motors to a specific machine will be the mounting holes. Which can be found in the motors specific datasheet.

Hi, I have intention of purchasing your 1/2 inch precision lead screw set to build my CNC machine, could I have the schematic dimension of your 1/2 inch anti-backlash nut, bearing for the lead screw and the shim? Also is your 2.2kW spindle able to mill Aluminum and what is the accuracy?

BYCNC response: Milling aluminum is no problem with our machines. Here is a video we recently did with our 4'x8' machine. The aluminum piece is about 1/4" thick: https://buildyourcnc.com/tutorials/tutorial-greenbull-aluminum-cutting The accuracy you will see from our our 2.2kW spindle is entirely dependent on the precision of your build, so it's not possible to say what level of accuracy you can achieve without an examination of the complete system. However, our spindles have a runout of less than .0001 in, which includes the collets that we sell. If you use a collet from another manufacturer, we cannot guarantee this TIR (Total Indicated Runout) dimension. For the dimension drawing of the anti-backlash nut, please contact us directly by phone or email to techsupport@buildyourcnc.com User response: I have emailed waiting for your reply. User response: Hi, I am still waiting for your email reply. BYCNC response: Your email has been sent. Additional Information: Additional Information: Additional Information: Additional Information: Additional Information: Additional Information: