Atmel Atmega324 AVR Mikrocontroller

I bought the Mach3 board and am trying to connect it with an AMB 1400 DI router, which has a normal power supply (1400W) as well as a digital interface which has three wires: a brown wire (10-26V, power supply), a white wire (ground) and a green wire (0-10V signal). I'm no electronics guy--how do I connect the digital interface of the AMB to the Mach3 board?

The Mach3 USB controller requires a minimum of 12V and a maximum of 24V to the DCM and 24V terminals. The DCM is the GND or DC negative terminal, and the 24V terminal is the positive terminal.

Follow up to the last question. I can just make a couple new pieces of acrylic but I just wanted to know if you had any other ideas. Thank you.

See initial question. Additional Information: Initial question is: https://www.buildyourcnc.com/FAQ/14009

can you ship a greenbull of blackfoot to japan

You can determine if the country is serviceable by: - selecting the items you want to purchase on the website - go to the cart (shopping cart top left of any webpage) - log in, or register - Enter the address and click on calculate shipping. The webpage will return the direct rates and whether your area is serviced or not. Feel free to enter any address as long as you are able to receive the package from that address. Additional Information: I did that and got two options: UPS ($1400) or FEDEX ($3800). Maybe FEDEX is already including the customs fees and import taxes, I don't know. I am afraid of buying it and having problems with customs later. That is why I asked if you guys have ever sent any machine to Brazil just to check if everything went fine with customs.

can you offer the blackToe 2'x4', Combo #1 (Plans with DVD) on amazon so I can use my amazon credit to purchase?

Note that the plans(with DVD) is for a smaller scale machine and for DYI CNC from the ground up, Here is the Plans with Hardware: (http://www.amazon.com/CNC-Machine-Hardware-and-Plans/dp/B005WD8WBO/ref=sr_1_1?ie=UTF8&qid=1407187007&sr=8-1&keywords=plans+and+hardware+kit+cnc) Here is our blackToe 2' x 4': (http://www.amazon.com/CNC-Routing-Machine-Kit-BuildYourCNC/dp/B005VTB23O/ref=sr_1_1?ie=UTF8&qid=1407186874&sr=8-1&keywords=blacktoe+cnc)