• primary image of LMT Onsrud 60-269 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter
  • primary thumbnail of LMT Onsrud 60-269 Solid Carbide Upcut Low Helix Finisher Cutting Tool, Inch, Uncoated (Bright) Finish, 10 Degree Helix, 3 Flutes, 4.0000" Overall Length, 0.7500" Cutting Diameter, 0.7500" Shank Diameter
1 2

BuildYourCNC

LMT Onsrud 60-269 Vollhartmetall-Aufwärtsdrallfräser mit geringem Helixwinkel, Zoll, unbeschichtet (blank) Ausführung, 10 Grad Helix, 3 Schneiden, 4.0000" Gesamtlänge, 0.7500" Schneiddurchmesser, 0.7500" Schaftdurchmesser

LMT Onsrud 60-269 Vollhartmetall-Aufwärtsdrallfräser mit geringem Helixwinkel, Zoll, unbeschichtet (blank) Ausführung, 10 Grad Helix, 3 Schneiden, 4.0000" Gesamtlänge, 0.7500" Schneiddurchmesser, 0.7500" Schaftdurchmesser

$338.80 USD
$338.80 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Titel

LMT Onsrud 60-269 LMT Onsrud 60-269 Vollhartmetall-Aufwärtsfräser mit geringer Spiralsteigung, Zoll, unbeschichtet (blanke) Oberfläche, 10 Grad Spiralsteigung, 3 Schneiden, 4.0000" Gesamtlänge, 0.7500" Schneidendurchmesser, 0.7500" Schaftdurchmesser. Entwickelt für perfekte Balance und extrem glatte Oberfläche über einen breiten Drehzahlbereich. Verwendung für Naturholz, Kunststoff, Verbundkunststoff und Mineralwerkstoffe.

Vollständige Details anzeigen

Questions & Answers

Have a Question?

Ask a Question

  • Please send a diagram of connections for pokeys57cnc to YL-620 VFD for Mach4

    When you install Mach4 and use the Pokeys57cnc, you will use the plug-in provided by Polabs. You can get this plug-in here: https://www.poscope.com/product/pokeys57cnc/ The Pokeys57cnc has a 0-10V output pin (a pulse width modulated (PWM) output pin) labeled onthe diagram as pin 17. You can see this pin at the top of the diagram here: https://buildyourcnc.com/item/electronicsAndMotors-electronic-component-breakout-Mach4-mach3-USB-ethernet-Board In Mach4, you will need to set the spindle speed output top this pin #17. In the plug-in, set this pin at 10kHz.

  • Hello. I have bought an RnR Motion Controller and a YL260-A and I have it set up to the AVI from RnR to the VI1 of YL620-A but I'm getting that the RPM varies not like interference but like a drop from max value to min value. What could be happening?

    Is the cable between the mach3 USB and the YL260 shielded. If that does not solve the problem, add an induction coil to the cable to reduce any current fluctuations.