• Tumbnail:
1 1

BuildYourCNC

5/16" Lager

5/16" Lager

$7.20 USD
$7.20 USD
Sale Ausverkauft
Versand wird beim Checkout berechnet
Titel

Dies sind typische Skateboard-Lager, die wir für unsere Linearschlittenführungen verwenden. Dieses Paket enthält Lager, die auf den gängigen Maschinenanforderungen basieren. Spezifikation: 5/16 Zoll Innendurchmesser, ungefähr 1/4 Zoll dick und der Außendurchmesser beträgt ungefähr 7/8 Zoll. Es gibt einen einzelnen Kugellagerkäfig. Die Abschirmung (Seite der Lager, die die Kugellager und das Fett im Käfig hält) ist aus Stahl.

Vollständige Details anzeigen

Questions & Answers

Have a Question?

Ask a Question

  • weights and dimensions for the redFrog

    19 x 34 x 5 x 19lb 33 x 24 x 5 x 26 lb 12 x 12 x 12 x 23lb 14 x 14 x 20 x 31lb 11 x 9 x 6 x 9lb

  • We have the CW 3000 chiller. Running a water cooled spindle and water temp reads rease 30 (deg C). But no fan operation. Do we have a problem?

    We ran the water cooled spindle longer yesterday. When the chiller read 31 deg C the fan came on.

  • HOW SHOULD I CARE FOR MAY GRAPEVINES?

    Vines are normally planted bare root from January to March and spaced 7 to 8 feet apart in rows 10 to 12 feet apart. Vertical stakes or posts with 1 or 2 wires on the side, or with �T� tops with wire are desirable supports for grapevines. Cane prune Thompson seedless and Concord. Spur prune other varieties. Frost (31oF) damages new shoots and fruit clusters in April or May, so plant where the frost is minimized. Spraying or dusting sulfur for mildew is necessary on wine and table grapes, but rarely needed with American types. (From http://ucce.ucdavis.edu/files/filelibrary/40/935.pdf )

  • GREENLEAN CABLE

    The greenlean requires a total of 91 feet of cable. The X axis needs 31 feet The Y axis needs 27 feet and the Z-axis needs 33 feet These are 20 gauge 4 conductor cable.

  • Bearings 30 Pack $24.00 When you click (for sale here) your not being specific enough, so which bearings are these?

    I found my answer under bearings in the side menu. However if you are in the Bill of Materials it just takes to a parts page but it's not part specific,a least not as far as I can tell.