BuildYourCNC
2-adriges, ungeschirmtes Kabel, 18 AWG
2-adriges, ungeschirmtes Kabel, 18 AWG
Verfügbarkeit für Abholungen konnte nicht geladen werden
18/2 AWG ungeschirmtes Kabel für den Einsatz in Stromversorgungsanschlüssen. Dieses Kabel eignet sich hervorragend für 24VDC-, 36VDC- und 48VDC-Stromversorgungsanschlüsse. Die Leiter (Drähte) im Inneren des Kabels sind rot und schwarz. Rot wird üblicherweise an die + Spannung und schwarz üblicherweise an die - Spannung der Netzteile angeschlossen. Ich verwende dieses Kabel, um die Netzteile mit den VCC- und GNC-Anschlüssen der Schrittmotortreiber zu verbinden.
Teilen
Questions & Answers
Have a Question?
-
What are the bolt dimensions for the SBR20 linear rails, can they work with 8020 Aluminum extrusions?
Our SBR20 rails use M8 bolts and are suitable for use with 8020 aluminum or any other common machine material. We suggest the use of our ball bearing pillow blocks with these rails, which you can find on our website here: https://buildyourcnc.com/item/mechanical-rails-linear-ball-bearing-block Additional Information: HOW TO FIND WIDH 38 HEIGHT 26 LINER GUIDE RAIL
-
I purchased some of your 20mm Hiwin Linear Rails. M5 bolts do not fit flush. The head stands out. Is the spec sheet out of date? What bolts will fit this rail AND T Nuts compatible with 8020's 15 series extrusions? Thanks.
Hi. The HIWIN spec rail will fit standard M5 screws. If you are using non standard screws with wide heads, or pan heads that are a bit larger than a standard round heads, then it may not fit. Make sure to source screws that have standard round heads, or socket heads for fastening the 20mm HIWIN spec rails.