CNC Questions And Answers

I purchased some of your 20mm Hiwin Linear Rails. M5 bolts do not fit flush. The head stands out. Is the spec sheet out of date? What bolts will fit...

I purchased some of your 20mm Hiwin Linear Rail...

I purchased some of your 20mm Hiwin Linear Rails. M5 bolts do not fit flush. The head stands out. Is the spec sheet out of date? What bolts will fit...

Inverter keeps giving me an over current error ...

Inverter keeps giving me an over current error (1.5kW inverter error OC-r). However this is now making a cut that is 80% lighter than when I first received it. Do...

Inverter keeps giving me an over current error ...

Inverter keeps giving me an over current error (1.5kW inverter error OC-r). However this is now making a cut that is 80% lighter than when I first received it. Do...

i purchased a breakout board from you guy and t...

i purchased a breakout board from you guy and the rnr motion control is messing with my license in mach 3 tech support at mach said it is the rnr...

i purchased a breakout board from you guy and t...

i purchased a breakout board from you guy and the rnr motion control is messing with my license in mach 3 tech support at mach said it is the rnr...

Were are the mounting locattions of the 6 Limit...

Were are the mounting locattions of the 6 Limit switches on the Blackfoot 4.3

Were are the mounting locattions of the 6 Limit...

Were are the mounting locattions of the 6 Limit switches on the Blackfoot 4.3

I bought Mach 4 and Mach 3 USB Motion card STB4...

I bought Mach 4 and Mach 3 USB Motion card STB4100. The installation Manual you direct me to is for installing board with Mach3. Where can I find directions for...

I bought Mach 4 and Mach 3 USB Motion card STB4...

I bought Mach 4 and Mach 3 USB Motion card STB4100. The installation Manual you direct me to is for installing board with Mach3. Where can I find directions for...

I have the YL600-2S-2K20 P 110V VFD. I have co...

I have the YL600-2S-2K20 P 110V VFD. I have configured it for using an external source to control the run. According to the enclosed documentation to set to forward run...

I have the YL600-2S-2K20 P 110V VFD. I have co...

I have the YL600-2S-2K20 P 110V VFD. I have configured it for using an external source to control the run. According to the enclosed documentation to set to forward run...

Tha answer did not help as I statement wrong di...

Tha answer did not help as I statement wrong diagram for the VFD I recived.

Tha answer did not help as I statement wrong di...

Tha answer did not help as I statement wrong diagram for the VFD I recived.

I have the redFly system and a 2.2kW Spindle - ...

I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

I have the redFly system and a 2.2kW Spindle - ...

I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

I have the redFly system and a 2.2kW Spindle - ...

I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

I have the redFly system and a 2.2kW Spindle - ...

I have the redFly system and a 2.2kW Spindle - 110V how do i connect the spindal?

What is the HP of the 2.2KW spindle

the tutorial for the discontinued usb card is g...

the tutorial for the discontinued usb card is great but i have your usb motion card stb4100 i need with AD AP +5v wired to the cp+cp-cw+and the cw-

the tutorial for the discontinued usb card is g...

the tutorial for the discontinued usb card is great but i have your usb motion card stb4100 i need with AD AP +5v wired to the cp+cp-cw+and the cw-

Do you recomend distilled water or coolant for ...

Do you recomend distilled water or coolant for your 80W laser tube with the CW-3000?

Do you recomend distilled water or coolant for ...

Do you recomend distilled water or coolant for your 80W laser tube with the CW-3000?

looking for wiring schematic for redleaf electr...

looking for wiring schematic for redleaf electronics to huijang yl600 VFD 110v, 2.2k, thanks!

looking for wiring schematic for redleaf electr...

looking for wiring schematic for redleaf electronics to huijang yl600 VFD 110v, 2.2k, thanks!

my servos only spin in one direction! and not o...

my servos only spin in one direction! and not only that, but when they do spin it is super jittery and inconsistent, it will spina small amount and juat clcik,

my servos only spin in one direction! and not o...

my servos only spin in one direction! and not only that, but when they do spin it is super jittery and inconsistent, it will spina small amount and juat clcik,

ABSOLUTELY NOTHING WORKS. I HAVE ALL STRUCTURE ...

ABSOLUTELY NOTHING WORKS. I HAVE ALL STRUCTURE AND MECHICAL PARTS OF THE BLACKTOOTH CUTTER DONE. HOWEVER WHEN WIRE UP STEPPER MOTOR TO DRIVER. THAT MACH 3 USB CONTROLLER BOARD, TRY...

ABSOLUTELY NOTHING WORKS. I HAVE ALL STRUCTURE ...

ABSOLUTELY NOTHING WORKS. I HAVE ALL STRUCTURE AND MECHICAL PARTS OF THE BLACKTOOTH CUTTER DONE. HOWEVER WHEN WIRE UP STEPPER MOTOR TO DRIVER. THAT MACH 3 USB CONTROLLER BOARD, TRY...

Can I make the whole for the router larger? Th...

Can I make the whole for the router larger? This is for a blacktoe and the whole is about 1/4 inch in diameter too small.

Can I make the whole for the router larger? Th...

Can I make the whole for the router larger? This is for a blacktoe and the whole is about 1/4 inch in diameter too small.

HI, I am looking for a drive sproket for a roll...

HI, I am looking for a drive sproket for a roller chain. The drive sproket should have an ID= 16mm. do you have something like this in your inventory?

HI, I am looking for a drive sproket for a roll...

HI, I am looking for a drive sproket for a roller chain. The drive sproket should have an ID= 16mm. do you have something like this in your inventory?

Country/region

CNC Questions And Answers