I am using your 425 Oz motors

The ports and pins are designated by the breakout board that you have, Now here are the schematics for both(https://www.buildyourcnc.com/item/electronicsAndMotors-parallel-breakout-relay#prettyPhoto/2/ and https://www.buildyourcnc.com/item/electronicsAndMotors-electronic-component-USB-Controller-Breakout#prettyPhoto/2/) Which for the Parallel the pins will be 1,14,2,3,4,5,6,7,8,9. For 1,14 you will need to use them together for a additional axis. Setup will be (ex.mach3) step in (2) / direction pin (3). continued for other pins, 4,5 6,7 etc. Now for the USB it has the label on the board right next to the terminal blocks, x-axis/etc.