Legacy Support: CNC Routing Machine Kit Version 1.3
Teilen
Legacy Support: CNC Routing Machine Kit Version 1.3
This page is a legacy support resource for the CNC Routing Machine Kit Version 1.3.
It is kept as a reference for older BuildYourCNC machine owners who may still need assembly, setup, or support information.
What This Page Is For
This page is not a current product listing. It is an older support page for a previous BuildYourCNC machine kit.
Use this page as a reference if you are working on or maintaining an older CNC Routing Machine Kit Version 1.3.
What This Machine Was Used For
The CNC Routing Machine Kit Version 1.3 was designed as a DIY CNC routing machine kit for cutting, carving, and routing projects.
Machines like this are commonly used for woodworking, signs, panels, patterns, and general CNC router projects.
Important Legacy Note
This is older BuildYourCNC support content. Some parts, electronics, wiring, software recommendations, or assembly steps may have changed over time.
If you are building or repairing this older machine, check your actual hardware before following any instructions.
Things to Check on Older CNC Machines
- Stepper motors
- Stepper drivers
- Power supply
- Controller board
- Limit switches
- Emergency stop wiring
- Mechanical alignment
- Loose hardware
- Software compatibility
Safety Reminder
Always power off the machine before working on wiring, electronics, motors, or mechanical parts.
If you are not sure how to troubleshoot the machine safely, ask someone experienced with CNC machines or electrical systems.
Summary
The CNC Routing Machine Kit Version 1.3 page should be treated as legacy support documentation.