[ Log In ]
thumbnail: 8 channel logic analyzer - iLogic

4 Channel Logic Analyzer

$149.00
Qty:
Thumbnail: quad buffer line driver 74HC126E

Quad Buffer Line Driver (Through Hole)

$0.69
Qty:
Newbie Hack Shirt Back
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
Type K Thermocouple Temperature Sensor

Type K Thermocouple - Temperature Sensor

$4.95
Qty:
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Image of the Atmega324p

Atmega324P

$8.50
Qty:

4 Channel Logic Analyzer

8 channel logic analyzer - iLogic
8 channel logic analyzer - iLogic

Introduction:

This is an absolute must have for diagnosing embedded programming projects. You can see exactly what digital signals are being produced on a signal wire or trace and you can do this for 4 channels (4 lines) simultaneously.

Description:

For communication projects, this is an invaluable tool. Say you've programmed the microcontroller to communication using UART, but you don't get the results at the other end, this logic analyzer will show you exactly what is going on and even tell you the baud, or rate of the communication. Download the software here.

Note: Due to manufacturer lead times, this product can take anywhere from 1-3 months to stock if not currently available.

The Logic analyzer is by Saleae. The case is beautifully constructed out of CNC machined aluminum and anodized to give a clean appearance. You can record, measure and view digital signals using a wonderfully designed user interface. You don't need to worry about this analyzer failing as it is protected from over current and voltage at the test lead inputs and the USB input. The manufacture has a worry free two year warranty.

Specifications:- Input voltage range: -.5V to 5.25V and uses the industry standard thresholds of .8V for logic lo and 2.0V for logic high. and will work with 5V, 3.3V, 2.5V and 2.0V systems. It is not recommended for 1.8V systems but may work.- Select frequencies: 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz. to get the high frequencies, unplug as many other USB peripherals as possible.- Operating systems compatibility: Linux recent Ubuntu, Fedora, or openSUSE, Windows XP, vista and 7, Mac OS X 10.4 Tiger or higher.Works with USB 2.0.

Included: - 1x9 Ultra-flexible test lead set with micro hooks for each lead.- USB Cable (1.8M length, A to mini-B)- Carrying case

4 Channel Logic Analyzer

$149.00
Qty:

Learn about the 4 Channel Logic Analyzer

Part 1: Making a circuit for the Atmel AVR Atmega32 microcontroller to light up an LED (Light Emitting Diode). The circuit consists of an LED, a resistor of the appropriate value to limit current to ...
Physically wiring the circuit for an LED (Light Emitting Diode) to a microcontroller and a resistor so we can turn the LED on and off.
Part 2: Making a program for the Atmel AVR Atmega32 microcontroller to light up an LED (Light Emitting Diode). The circuit consists of an LED, a resistor of the appropriate value to limit current to ...
Schematic on paper of one button with hardware debouncing and two LEDs (Light Emitting Diodes) connected to an AVR microcontroller. The push button switch is connected to pin 1 on PORT B and the LEDs...
Breadboard circuit of one button with hardware debouncing and two LEDs (Light Emitting Diodes) connected to an AVR microcontroller. The push button switch is connected to pin 1 on PORT B and the LEDs...