[ Log In ]
2x36 pin header IDC

2.54 mm (0.1") Pitch Male Connector 36 pin Header

$0.75
Qty:
thumbnail: 3 position female connector with 2.54mm pitch

3 position female connector with 2.54mm pitch

$0.55
Qty:
molex connector with crimp pins thumbnail

4 Pin Female Molex Connector with Crimp Pins

$3.50
Qty:
3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65
Qty:
USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80
Qty:
Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99
Qty:
Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95
Qty:
Image of the Atmega324p

Atmega324P

$8.50
Qty:

10K timmer potentiometer

10K Trimmer Potentiometer (Through Hole)

$0.85
Qty:

A Poor Man's Way to Crimp a Crimp Pin for a Female Header

A standard pair of needle nose pliers is used to crimp this crimp pin since this is the tool that most have rather than the more expensive crimping tool.

The needle nose pliers is first used to close the crimping part of the crimp pin and then the wire is inserted and the pliers is used to finally close the crimp.

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):