Programming: Initializing 7 LEDs and a Button on PORTB and the Same for PORTD

Advance Your Skills Professionally! Advance Your Skills Professionally! 'ARM Microcontrollers: Programming and Circuit Building Volume 1', accompanied by a beginner-friendly advanced kit, is the ideal starting point for aspiring professionals. Esteemed in universities and high schools, this guide bypasses the complexities of Arduino, offering a more fundamental, bare-metal approach to learning. It not only simplifies the process but also sets you on a path to a more professional level in microcontroller programming. Perfect for students and hobbyists, this book is your gateway to efficiently prototyping and transitioning projects into production. Start with the fundamentals and quickly move to creating professional-level applications!

Single Red Through Hole LED (Light Emitting Diode)

$0.34

Qty:

Single Green Through Hole LED (Light Emitting Diode)

$0.34

Qty:

Single Yellow Through Hole LED (Light Emitting Diode)

$0.34

Qty:

Thumbnail: quad buffer line driver 74HC126E

Quad Buffer Line Driver (Through Hole)

$0.69

Qty:

USB 2.0 Cable 10 Foot Type A Male to Type B Male

USB 2.0 Cable Type A Male to Type B Male - 10 FT

$4.80

Qty:

Multimeter Security Banana Plug To Test Hook Clip Probe Lead Cable 500V

$8.99

Qty:

3 Foot USB Cable Type A to USB Cable Type A

USB Cable Type A Male to USB Type A Male - 3 FT

$2.65

Qty:

Tumbnail: 62 oz-in NEMA 17 Stepping motors (also called stepper motor)

NEMA 17 Stepping Motor (62 oz-in 5mm single shaft)

$19.95 Out of Stock

Qty:

Atmega324P

$8.50

Qty:

Programming: Initializing 7 LEDs and a Button on PORTB and the Same for PORTD

A Push Button and 7 LEDs are Initialized on PORTD and PORTB. The Push Button is located on the 8th pin (pin 7) on each port and the 7 LEDs are located on the remaining pins of each port.

Initialization code: 
DDRB = 0b01111111; 
DDRD = 0b01111111;
PORTB = 0b10000000;
PORTD = 0b10000000;

Comments and Additional Information

Have some code to share? Or additional information? Respond here:

You need to be logged in to save a response on this page. The response must be constructive, helpful, supplimentary or to correct the existing video, code or narrative content.

Description:

Code (optional):

Learn the Fundamentals of Mechatronics!

Programming: Initializing 7 LEDs and a Button on PORTB and the Same for PORTD

Comments and Additional Information